Sico SSD-1-53-13M Firmware MT6735 Flash File Read Cm2 (Free)

MT6735__Sico__SSD-1-53-13M__malata6735_65c_l__5.1__ALPS.L1.MP3.V2_MLT6735.65C.L1_P45

Operation : Read Flash [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 4 ] Sync... Inital Boot Ok! BB_CPU_PID : 6735 BB_CPU_NME : [MediaTek] MT6735_S00 BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer   : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x93 NAND Flash : NOT INSTALLED eMMC Flash : 510001154D333238923D00428F3DF6E0 Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x15 , OEM : 0100 [eMMC] : FLASH_INF : [SAMSUNG] , BM328 [eMMC] : FLASH_CID : 150100513832334D42003D92E0F6A28F [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000 [eMMC] : FLASH_LEN : 0x00000003A3E00000 [eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB] DEV RID    : 0xE5974B4ABAD14679C075E45268946180 INT RAM    : 0x00020000 EXT RAM    : 0x80000000 [2 GiB] BOOT TYPE  : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok!

 Reading Flash Content now ... xGPT : Normalize settings Ok! Brand     : Sico ProdName  : full_malata6735_65c_l ProdModel : SSD-1-53-13M Device    : malata6735_65c_l AndroidVer: 5.1 MTKxCPU   : MT6735 MTKxPRJ   : ALPS.L1.MP3.V2_MLT6735.65C.L1_P45 [Read Ok] : preloader_malata6735_65c_l.bin [Read Ok] : lk.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : logo.bin [Read Ok] : secro.img [Read Ok] : tz1.img [Read Ok] : tz2.img [Read Ok] : system.img [Read Ok] : cache.img [Read Ok] : userdata.img [ScatCFG] : MT6735 / V1.1.2 / malata6735_65c_l / EMMC Android Info saved MAUI Meta DB saved HWConfig Info saved FW Size : 2187 MiB Scatter saved to : C:\Users\babu\Desktop\read file\MT6735__Sico__SSD-1-53-13M__malata6735_65c_l__5.1__ALPS.L1.MP3.V2_MLT6735.65C.L1_P45\ All done! Done! Elapsed: 00:14:32 Reconnect Power/Cable!

Download Here

Password-SSD-1-53-13M.070

How to Flash Stock Firmware ROM (Flash File)
Step 1: Download and extract the firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.

Important Notes: Take a Backup of your mobile data before flashing or installing the firmware on your smartphone. As this will help you to recover the data whenever any thing wrong happens to your mobile.