Genx Mega Plus 8GB Firmware MT6582 Flash File Read Cm2 (Free)

MT6582__alps__MEGA_PLUS__mz606__4.4.2__ALPS.KK1.MP1.V2.11

Wait for phone... Phone found! [ 4 ] Sync... Inital Boot Ok! BB_CPU_PID : 6582 BB_CPU_NME : [MediaTek] MT6582_S00 BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer   : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x87 NAND Flash : NOT INSTALLED eMMC Flash : 8801034E436172642023CEA61F5712F1 Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x88 , OEM : 0103 [eMMC] : FLASH_INF : [FORESEE] , draC [eMMC] : FLASH_CID : 8801034E436172642023CEA61F5712F1 [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000 [eMMC] : FLASH_LEN : 0x00000001CE100000 [eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB] DEV RID    : 0xE5974B4AF47959173DE88426F5B25424 INT RAM    : 0x00020000 EXT RAM    : 0x40000000 [1 GiB] BOOT TYPE  : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok!

 Reading Flash Content now ... Brand     : alps ProdName  : mz606 ProdModel : MEGA PLUS Device    : mz606 AndroidVer: 4.4.2 MTKxCPU   : MT6582 MTKxPRJ   : ALPS.KK1.MP1.V2.11 [Read Ok] : preloader_mr601.bin [Read Ok] : MBR [Read Ok] : EBR1 [Read Ok] : lk.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : secro.img [Read Ok] : logo.bin [Read Ok] : EBR2 [Read Ok] : system.img [Read Ok] : cache.img [Read Ok] : userdata.img [ScatCFG] : MT6582 / V1.1.1 / mr601 / EMMC Android Info saved MAUI Meta DB saved HWConfig Info saved FW Size : 934 MiB Scatter saved to : C:\Users\babu\Desktop\read file\MT6582__alps__MEGA_PLUS__mz606__4.4.2__ALPS.KK1.MP1.V2.11\ All done!

Download Here

Passwors-MEGA_PLUS.007

preloader_mr601.bin (117.kb)

How to Flash Stock Firmware ROM (Flash File)

Step 1: Download and extract the firmware on your computer.

Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.

Step 3: Install the USB Drivers (skip if drivers are already installed).

Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.

Step 5: Connect your Smartphone to the computer using the USB Driver.

Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.

Step 7: Green Ring will appear at the end of successful Flash.

Important Notes: Take a Backup of your mobile data before flashing or installing the firmware on your smartphone. As this will help you to recover the data whenever any thing wrong happens to your mobile.